Search found 376 matches

by Stig
Sat May 05, 2018 10:49 am
Forum: FZR1000
Topic: Clutch bite point
Replies: 4
Views: 529

Re: Clutch bite point

I fitted the adjustable lever off the 750 so the bite point felt more natural
by Stig
Sun Jan 28, 2018 4:29 pm
Forum: FZR1000
Topic: harris "harribox fzr1040
Replies: 2
Views: 515

Re: harris "harribox fzr1040

V nice. Is this the one from eBay that was listed several times?
by Stig
Wed Jul 26, 2017 7:50 am
Forum: FZR1000
Topic: FZR1000 Back to life?
Replies: 3
Views: 823

Re: FZR1000 Back to life?

It'll be because it's a social type email that's attacked by spammers hotmail etc
Email EXUP1000 admin and I'll unlock to let you register
:thumbsup:
by Stig
Sat Jul 22, 2017 3:53 am
Forum: FZR1000
Topic: FZR1000 Back to life?
Replies: 3
Views: 823

Re: FZR1000 Back to life?

Definitely drain fuel and give carbs a good clean. Would be tempted to spin it over without plugs maybe drop a small amount of oil down the bores to make sure it's lubed as you can't be sure it's been turned over whilst stored

Welcome to the mad house btw
by Stig
Thu Jun 29, 2017 3:57 pm
Forum: FZR1000
Topic: Front brake issue
Replies: 22
Views: 4299

Re: Front brake issue

Did you manage to get this issue sorted?
by Stig
Fri Mar 17, 2017 1:00 pm
Forum: UK :: For Sale / Wanted
Topic: FZR600 Projection Racing Lowering Suspension Links
Replies: 5
Views: 1363

Re: FZR600 Projection Racing Lowering Suspension Links

If you need bones, I still supply any size in stainless and post worldwide at cost
I also sell on eBay under ID. stigsdump2000
by Stig
Wed Mar 01, 2017 4:22 pm
Forum: FZR1000
Topic: fork diameters
Replies: 2
Views: 818

Re: fork diameters

The 50mm diameter is measured at the top part held in the fork clamps and from memory the lower chrome slider is 45mm
The r right way up forks 89-90 model are 43mm chrome slider
The Genesis pre Exup 85-88 are 41mm chrome slider
by Stig
Sun Feb 26, 2017 3:42 am
Forum: FZR1000
Topic: 94 FZR1000 owner needs help on carb removal
Replies: 2
Views: 876

Re: 94 FZR1000 owner needs help on carb removal

If you remove the coils tray you should be able to access the screws from the middle outwards if the previous owner has replaced the clamps in the correct direction Basically if you're at the front of the bike looking towards the rear the screw heads should face in a V shape towards the headstock/ c...
by Stig
Sun Jan 15, 2017 4:41 am
Forum: FZR1000
Topic: Replacing the EXUP
Replies: 11
Views: 3210

Re: Replacing the EXUP

I can sell the cleaned up version for £14 plus post 155 is about the shortest bone you can use without the shock fouling the hole in the swingarm ..... plus shorter bones make the bike tip over further on the side stand I'm currently in the process of making arrangements to lengthen the stand but st...
by Stig
Sat Jan 14, 2017 12:38 pm
Forum: FZR1000
Topic: Replacing the EXUP
Replies: 11
Views: 3210

Re: Replacing the EXUP

I can sort you some stainless dog bones if needed
by Stig
Fri Jan 13, 2017 2:02 pm
Forum: FZR1000
Topic: Replacing the EXUP
Replies: 11
Views: 3210

Re: Replacing the EXUP

by Stig
Thu Nov 24, 2016 10:49 am
Forum: FZR1000
Topic: samco hose kit
Replies: 3
Views: 1755

Re: samco hose kit

Not sure which hoses are included in the kit but only major difference is that one has a separate oil cooler to the rad whereas in the other the cooler is integrated. Associated oil pipes are different to the filter housing as earlier model runs a paper filter and the later model is spin-on
by Stig
Tue Nov 22, 2016 12:21 pm
Forum: General Discussion
Topic: UPGRADING SITE FRIDAY MORNING
Replies: 6
Views: 2623

Re: UPGRADING SITE FRIDAY MORNING

Certainly looks a lot better on iPhone ... Simple easy to read layout
by Stig
Mon Nov 21, 2016 5:04 pm
Forum: FZR1000
Topic: 1988 front wheel/discs on '89 forks?
Replies: 5
Views: 1820

Re: 1988 front wheel/discs on '89 forks?

Just be aware that if you're using the EXUP loom there are a couple of spare wires that are market specific. In the UK there's a red/black wire unused and a red/white wire. Both are located mid loom around the starter and fuel pump area
by Stig
Mon Nov 21, 2016 4:35 am
Forum: FZR1000
Topic: 1988 front wheel/discs on '89 forks?
Replies: 5
Views: 1820

Re: 1988 front wheel/discs on '89 forks?

Yes motor will fit As for igniter box you'll need 89-90 as they have the round plug for the Exup servo whereas the later plugs were more rectangular Also known of the 750 CDI being used which allows a higher rev limit but you're into a whole lot of pain if you over Rev the motor without upgrading th...

Go to advanced search