Search found 270 matches

by cntryboy85
Sun Mar 16, 2014 4:25 am
Forum: FZR600
Topic: Con rod bearing size.
Replies: 7
Views: 1355

Re: Con rod bearing size.

I think I understand...lol. But I sent the info to my buddy so that when he gets a chance he can take a look at it and get the right numbers for me. I just hope to have all the machine work done and parts at the house by the time I transfer back state side and can get her back on the road while i am...
by cntryboy85
Sat Mar 15, 2014 1:30 pm
Forum: FZR600
Topic: Con rod bearing size.
Replies: 7
Views: 1355

Re: Con rod bearing size.

Thank you Ill have to see if my buddy can pull the engine out of the crate it is in and get me those numbers. have the rods so I can check them there. Just to make sure I got this right. The numbers on the case or the crank? Are they the same number? I take the numbers from each rod and subtract the...
by cntryboy85
Sat Mar 15, 2014 5:11 am
Forum: FZR600
Topic: Con rod bearing size.
Replies: 7
Views: 1355

Re: Con rod bearing size.

I have a manual. but not with me. I have the bearings, rods, wrist pins, and pistons in my locker right now floating some where off of Japan. The rest of the engine and everything I have to go with it and the books are sitting in the shed in water tight containers. I didnt want to take a chance on w...
by cntryboy85
Fri Mar 14, 2014 4:51 pm
Forum: FZR600
Topic: Con rod bearing size.
Replies: 7
Views: 1355

Con rod bearing size.

I know I have posted on here about bearing sizes before. I have been told to plastigauge my bearings to find out if they are still good or not. I would do that but cant really do it. Because the engine was pulled apart about a year ago by my buddy for me while I am on deployment. When I first starte...
by cntryboy85
Wed Mar 05, 2014 11:17 am
Forum: FZR600
Topic: 660 engine?
Replies: 13
Views: 1871

Re: 660 engine?

i tried to go back to it but it isnt working i am on limited connectivity some links work some dont. i am underway on a ship and internet is sketchy most times. hell it took me 20 minutes to get online here.
by cntryboy85
Mon Mar 03, 2014 2:14 pm
Forum: FZR600
Topic: 660 engine?
Replies: 13
Views: 1871

Re: 660 engine?

reelrazor i hear you could be able to get the rods honed to fit the 4TV pins...is this true? i tired to do it while i was home and coulnd't get it done so i brought them to japan with me but never got a chance to get them to a shop over here working form sun up to after sun down. if you can do this ...
by cntryboy85
Sat Jan 18, 2014 4:14 am
Forum: FZR600
Topic: 660 engine?
Replies: 13
Views: 1871

Re: 660 engine?

ok so i am almost there already. i am just going to replace them with new bearings so that i know they are good. i mean the bike is almost 20 years old and never been apart before. DO THE PLASTIGAUGE DEAL! It's HOW IT IS DONE. You CANNOT just throw bearing shells at it and call it good. got the bea...
by cntryboy85
Wed Jan 08, 2014 9:57 pm
Forum: General Discussion
Topic: The war on sportbike Thieves
Replies: 50
Views: 29715

Re: The war on sportbike Thieves

My cousin has a 05 R6. He lives in kind of a country part of town and had his bike in the car port behind the house under a dust cover because he had wrecked his other bike and broke his ankle about 3 weeks prior to this. I was home on leave he had called me to ask me to come help him with some stuf...
by cntryboy85
Sat Dec 28, 2013 12:15 am
Forum: FZR600
Topic: 95 FZR 600 build
Replies: 10
Views: 1196

Re: 95 FZR 600 build

didnt get the rods and pins to the machine shop. the shop that i called and told them what i had and what i needed told me over the phone that they could do what i wanted. however when i got there and put them on the counter and said "i need this to fit this" the guy looks at me and says w...
by cntryboy85
Thu Dec 26, 2013 4:45 pm
Forum: FZR600
Topic: Ohh, Yes, he did...660 the easy(?) way
Replies: 73
Views: 14883

Re: Ohh, Yes, he did...660 the easy(?) way

they should be able to just pop out of the head correct?
by cntryboy85
Tue Dec 24, 2013 10:36 pm
Forum: FZR600
Topic: Ohh, Yes, he did...660 the easy(?) way
Replies: 73
Views: 14883

Re: Ohh, Yes, he did...660 the easy(?) way

If it works I have a set of rods I'd like to send you! Any decent automotive machine shop will have a rod hone. The one I used uses a rod hone that indexes off the big end so that the small end is perfectly aligned with it. And 'reads' the pin for sizing. They need to take approximatley .018" ...
by cntryboy85
Thu Dec 19, 2013 10:57 am
Forum: FZR600
Topic: 95 FZR 600 build
Replies: 10
Views: 1196

Re: 95 FZR 600 build

Dropping rods and pins off at the machine shop today going to be able to pick them up either later today or early tomorrow. Have everythingg with the rcxception of the engine case cleaned up and ready goto. Lots of pictures going to come up soon.
by cntryboy85
Tue Dec 17, 2013 3:01 pm
Forum: FZR600
Topic: 95 FZR 600 build
Replies: 10
Views: 1196

Re: 95 FZR 600 build

back at home. got a lot of the parts cleaned up and taking pictures along the way. bad point right now possibly have to buy a new piston and wrist pin. one of them are stuck together and cant get them apart so that isnt good. about to try get get the bottom end pulled apart but i have been told ther...
by cntryboy85
Sat Dec 07, 2013 6:23 am
Forum: Items for Sale
Topic: Fuel Injection Kit - $600
Replies: 11
Views: 2087

Re: Fuel Injection Kit - $600

bike was running and carbs were cleaned not long before the tear down. road the bike every day before i left for deployment. last ride i took was 75 miles one way new years day this year while i was home on leave. my buddy took it around his neighbor hood a few times after that then tore the engine ...
by cntryboy85
Wed Dec 04, 2013 9:31 pm
Forum: Items for Sale
Topic: Fuel Injection Kit - $600
Replies: 11
Views: 2087

Re: Fuel Injection Kit - $600

as far as part number i am not sure. i ordered it off of partzilla.com about 2 weeks ago. i am out of country right now. going home on leave next weekend and going to be working on the bike again. right now it is ripped in half but got just about all of the parts i needed. ill message my buddy for p...

Go to advanced search