Search found 213 matches

by SouthendChris
Fri Feb 19, 2016 1:33 pm
Forum: General Discussion
Topic: FRZ 250 exup Help needed
Replies: 6
Views: 2447

Re: FRZ 250 exup Help needed

Which model FZR250 do you have?? 2KR or 3LN?? The biggest problem with getting a good end can with the 250's is the fact no one makes the connecting pipe between the header exit and the silencer. A lot of the ones from Japan are all in one items. I have a coerce pipe on mine, with std headers (as I ...
by SouthendChris
Sun Jan 03, 2016 9:56 am
Forum: FZR250
Topic: 1989 FZR 250
Replies: 8
Views: 9578

Re: 1989 FZR 250

This is my 3LN1 at the moment. Got lots on so had no time to move on with it :(

Image
by SouthendChris
Mon Dec 14, 2015 7:12 am
Forum: FZR250
Topic: 1989 FZR 250
Replies: 8
Views: 9578

Re: 1989 FZR 250

That looks like a 3LN1 model, first of the beam framed (deltabox?) bikes. Handle very well they do. As one of the other poster mentions, your indicators do look like aftermarket ones. The rear ones on the FZR200-RR bikes are tiny little ones with square lenses and the stalk kind of goes out and upwa...
by SouthendChris
Sat Nov 28, 2015 10:12 am
Forum: FZR250
Topic: FZR250 3LN3 Fork Stanchion Rechroming
Replies: 1
Views: 2137

Re: FZR250 3LN3 Fork Stanchion Rechroming

There is absolutely nothing you describe in the parts diagram books. As far as I know there are are only 2 parts that could be made of plastic in the forks. They would both be made of white plastic. One of them is a washer that sits in the top of the 'rebound piston'. In the parts diagram it's descr...
by SouthendChris
Sun Sep 14, 2014 12:04 pm
Forum: UK :: For Sale / Wanted
Topic: FZR250 3LN parts wanted
Replies: 0
Views: 1095

FZR250 3LN parts wanted

Hello. I am after parts for the FZR250 3LN model. Preferably the 3 model onward - the one with the trapezoidal 'projector' type headlight. I am after the mount for the remote reservoir on the front brake. It seems it's no longer available from Yamaha. A front fairing subframe might not go amiss - le...
by SouthendChris
Sun Jun 15, 2014 8:53 am
Forum: General Discussion
Topic: Parts catalogue
Replies: 16
Views: 4532

Re: Parts catalogue

Essex UK eh!? Give us a shout when you get it together and fancy a rideout. I am a few miles outside sunny Southend-on-Mud :thumbsup:

Image

Chris
by SouthendChris
Sat May 10, 2014 10:33 am
Forum: General Discussion
Topic: And so it begins....
Replies: 6
Views: 1290

Re: And so it begins....

A 1WG with a 3TJ swinger. After the 17" rear wheel I imagine. Nice looking bike!
by SouthendChris
Wed Mar 05, 2014 3:41 am
Forum: FZR250
Topic: Help Needed
Replies: 6
Views: 2610

Re: Help Needed

If yours is an 89 model then it has the single disc? If so then to be honest the easiest swap is going to be a later 3LN twin disc front end. The forks are 38mm (same as some of the later 400 and 600 Genesis I think) and you get a decent remote reservoir master cylinder. Just give the calipers a ref...
by SouthendChris
Sat Jan 04, 2014 7:03 am
Forum: FZR400
Topic: 01-03 gsxr750 forks on fzr400
Replies: 10
Views: 3122

Re:

Buy a digital speedo i had one on my xr worked fine infact was more accurate took ten mins to fit and only cost 20 quid I ran it with a Cateye speedo for a little while but its just too small. Because I ride a few other bikes it's just second nature to flick a look at the normal speedo to double ch...
by SouthendChris
Fri Nov 29, 2013 5:33 pm
Forum: YZF600r
Topic: My FZR 600R Pics
Replies: 4
Views: 2146

Re: My FZR 600R Pics

Yep. Looking very nice.
by SouthendChris
Sun Nov 17, 2013 11:46 am
Forum: FZR600
Topic: enginge replacement problem
Replies: 5
Views: 796

Re: enginge replacement problem

You should refit all of your hoses exactly how they were on your original engine. Your original hoses would not have had a feed that goes to 'an' oil cooler in the first place. There *might* be slight differences in how the thermostat is plumbed in - but use all the hoses and thermo housings from yo...
by SouthendChris
Sat Nov 16, 2013 7:15 pm
Forum: FZR600
Topic: enginge replacement problem
Replies: 5
Views: 796

Re: enginge replacement problem

From this picture below you can see that this pipe from the oil cooler goes to the bottom left of the radiator (as you look at it from the front of the bike).

I don't have any other pics of the hose arrangements :-?

Image
by SouthendChris
Sat Nov 16, 2013 1:04 pm
Forum: FZR600
Topic: enginge replacement problem
Replies: 5
Views: 796

Re: enginge replacement problem

Which model FZR600 do you have? Does the frame number start with 3HE or 4JH?? You do not have to connect any pipes to the oil cooler, you wont be getting any benefit from the oil cooler being there - but you can wait to plumb it in as you will need new hoses to do so. You should be able to use all y...
by SouthendChris
Tue Sep 17, 2013 2:01 pm
Forum: FZR400
Topic: Fzr 400 3tj pet cock
Replies: 2
Views: 752

Re: Fzr 400 3tj pet cock

Apparently the square plastic bit in the 3TJ petcock is the same as the metal one in a Suzuki GS500 :shocker At the moment I am running mine with an R1 petcock as it has a nice BIG manual handle on it. I did need a 10 to 8mm pipe reducer though. I am going to do a proper job one winter and fit the F...
by SouthendChris
Sun Sep 08, 2013 7:07 pm
Forum: FZR400
Topic: 01-03 gsxr750 forks on fzr400
Replies: 10
Views: 3122

Re: 01-03 gsxr750 forks on fzr400

Lol - 3 stars and counting :duh:

Go to advanced search