Search found 1117 matches

by cad600
Wed Mar 11, 2015 7:57 pm
Forum: YZF750
Topic: Cam specs
Replies: 1
Views: 1311

Re: Cam specs

750

Intake

Lobe: 32.6 - 32.7 mm
Dia: 24.95 - 25.05 mm

Exhaust

Lobe: 33.0 - 33.1 mm
Dia: 24.95 - 25.05 mm

1000

Intake

Lobe: 32.5 - 32.6 mm
Dia: 24.95 - 25.05 mm

Exhaust

Lobe: 32.95 - 33.05 mm
Dia: 24.95 - 25.05 mm
by cad600
Fri Nov 16, 2012 12:52 pm
Forum: Items for Sale
Topic: F/S YZF660 engine
Replies: 6
Views: 1074

Re: F/S YZF660 engine

Hadn't given it much thought. Make me an offer.

Some of these parts are quite expensive being new from Yamaha. I probably have a grand into base engine components and the new parts for the build.
by cad600
Thu Nov 15, 2012 3:18 pm
Forum: Items for Sale
Topic: F/S YZF660 engine
Replies: 6
Views: 1074

F/S YZF660 engine

Any interest in a YZF based 660? I've got all the parts including some very tasty upgrades that I'm no longer going to do anything with. My plan was to build a 660 engined FZR400, but I've completely changed my mind. I have all of the engine parts and electronics. The only missing pieces are the car...
by cad600
Fri Jun 01, 2012 8:23 pm
Forum: YZF750
Topic: My YZF750R
Replies: 66
Views: 13435

Re: My YZF750R

Well, it has been a while with the YZF750. I had to sell off the Ohlins front end. I'm still not over that. But some times ya got to do what ya got to do. I got tired of the miss-matched body work and my plan was to paint it the entire time. So I finally got around to doing it. I thought I had devel...
by cad600
Wed Feb 15, 2012 8:02 am
Forum: YZF750
Topic: My YZF750R
Replies: 66
Views: 13435

Re: My YZF750R

Those Ohlins are amazing :notworthy: soooo tempting..... but I have to be a nagger and say "why not racetech?" it would be just as good, but not as gold..... Simply because they are Ohlins. I don't view the Racetech as being on the same level as these. Don't get me wrong though as the Rac...
by cad600
Sun Dec 11, 2011 6:18 pm
Forum: FZR600
Topic: engine swap
Replies: 12
Views: 870

Re: engine swap

The front fairing will swap, but you need the correct windscreen and fairing mount. The problem with dropping an R6 engine into a FZR frame has more to do with the head width and the lack of mounting. The FZR engine uses frame rails to attach the engine (the head is free) while the R6 engine has arm...
by cad600
Sun Nov 06, 2011 1:56 pm
Forum: FZR600
Topic: Engine problem - 660 conversion?
Replies: 18
Views: 5080

Re: Engine problem

Yep, the 4JH pistons and rods will work with the FZR crank. You really need the 4JH piston case as well to make it easier. The FZR600 valve head will bolt up and should work. But the YZF600 valve head will be more efficient as you are basically building a 660 engine. You will also need a 3mm spacer ...
by cad600
Thu Nov 03, 2011 8:10 am
Forum: FZR600
Topic: Insurance quotes
Replies: 11
Views: 637

Re: Insurance quotes

Insurance will vary company to company based on were you live, your driving record, and how many they insure near you (including payout). I was with Geico and would check periodically with Progressive to compare rates. Progressive was always $600 more per year. But when Geico jacked up my rate for n...
by cad600
Fri Oct 28, 2011 8:19 pm
Forum: YZF600r
Topic: Need YZF oversize pistons
Replies: 22
Views: 3879

Re: Need YZF oversize pistons

Don't worry, they have it. The unit is the same for nearly all applications and it is only the wire connectors and program you load onto it that is different. I've used mine to run a yzf engine. They are in the Cezc republic though so the time difference is about 8 - 10 hrs and they always take a wh...
by cad600
Thu Oct 27, 2011 6:17 pm
Forum: YZF600r
Topic: Need YZF oversize pistons
Replies: 22
Views: 3879

Re: Need YZF oversize pistons

So since the YZF rotor does not fit the FZR crank, what is the solution to this. I don't have an FZR rotor..and which model of ignitech ignition would be suitable for the motor? Go buy a rotor from eBay. That will solve it and they should be fairly cheap. As for the Ignitech, it depends on what set...
by cad600
Thu Oct 27, 2011 11:55 am
Forum: YZF600r
Topic: Need YZF oversize pistons
Replies: 22
Views: 3879

Re: Need YZF oversize pistons

the location of the timing mark on the rotor, but you may be able to get one then fabricate a new rotor with the correct timing location. The timing location just means you have to be careful with which generator cover you pick. The issue is the timing PATTERN machined on the OD of the rotor. The F...
by cad600
Thu Oct 27, 2011 7:15 am
Forum: YZF600r
Topic: Need YZF oversize pistons
Replies: 22
Views: 3879

Re: Need YZF oversize pistons

Take a look around the Hybrid section and do a search on the 660. You'll find some good info on the build. Hope you ordered the correct FZ6 rods. FZ6 that had the correct rod length and dia was not sold in the US and it was an early model (something around 98-99 I think). As far as the CDI goes. Typ...
by cad600
Sat Oct 22, 2011 8:27 am
Forum: YZF600r
Topic: Need YZF oversize pistons
Replies: 22
Views: 3879

Re: Need YZF oversize pistons

No one makes a set for the YZF600. It will be a custom order.
by cad600
Sat Sep 24, 2011 7:37 am
Forum: General Discussion
Topic: Danish pastry = part Ducati part FZR + exotic fruit
Replies: 2
Views: 680

Re: Danish pastry = part Ducati part FZR + exotic fruit

We've seen this one before and talked about it at some length. I love what the guy did and the level he took it to.

Go re-find though.
by cad600
Fri Sep 23, 2011 3:45 pm
Forum: FZR600
Topic: 91-'92 Upper Front Fairing
Replies: 4
Views: 454

Re: 91-'92 Upper Front Fairing

Sending you a PM.

Go to advanced search