94 FZR1000 owner needs help on carb removal

Moderators: Site Director, FZR Forum Moderators

lunchbeast
Site Newbie
Posts: 5
Joined: Sun Aug 22, 2010 3:08 am

94 FZR1000 owner needs help on carb removal

Postby lunchbeast » Sun Feb 19, 2017 8:58 pm

Can somebody explain how to get the carbs off of a 94 FZR1000? I know there are clamps on rubber boots, but I can't even see the clamps's screws, much less get any tools on them, because of the downdraft angle of the carbs. Lots of posts on carb cleaning, repair, tuning, etc, which means pretty much everybody but me has figured out how to get them off and back on, but nothing anywhere with 'how to get them off'. I presume it's similar for all the FZRs, but the 1000 is what I'm dealing with.

Thanks,
lunchbeast

dalton282016
Site Newbie
Posts: 4
Joined: Tue Oct 25, 2016 2:01 pm
Location: Tampa, fl

Re: 94 FZR1000 owner needs help on carb removal

Postby dalton282016 » Tue Feb 21, 2017 6:35 am

Should be able to get to them from the bottom with an Allen wrench

User avatar
Stig
Level 3.5
Level 3.5
Posts: 397
Joined: Mon May 10, 2010 8:11 am
Location: Nottinghamshire UK
Contact:

Re: 94 FZR1000 owner needs help on carb removal

Postby Stig » Sun Feb 26, 2017 3:42 am

If you remove the coils tray you should be able to access the screws from the middle outwards if the previous owner has replaced the clamps in the correct direction
Basically if you're at the front of the bike looking towards the rear the screw heads should face in a V shape towards the headstock/ coils area if that makes sense
If its not broken it dont need fixing

http://www.exup1000.co.uk


Return to “FZR1000”

Who is online

Users browsing this forum: No registered users and 3 guests