valve clearances and adjustments

Moderators: Site Director, FZR Forum Moderators

tony
100+ Posts
100+ Posts
Posts: 120
Joined: Thu May 27, 2010 12:28 pm
Location: north wales uk

valve clearances and adjustments

Postby tony » Sat Nov 20, 2010 2:51 pm

where as us older generation were hands on on the two strokes the fourstroke is a lttle more complicated for the younger generation there must be someone on this site who is able and willing to create a thread on valve adjustment clearances and shim replacment any volinteers

User avatar
apsolus
Level 2.5
Level 2.5
Posts: 255
Joined: Sun Sep 19, 2010 7:35 pm
Location: dahlonega GA

Re: valve clearances and adjustments

Postby apsolus » Sun Nov 21, 2010 1:40 am

Fluff

User avatar
olie05
Level 2.0
Level 2.0
Posts: 213
Joined: Mon Nov 03, 2008 3:51 pm

Re: valve clearances and adjustments

Postby olie05 » Sun Nov 21, 2010 3:32 pm

apsolus wrote:Fluff


That's pretty lame. If you don't have anything valuable to add to the thread, DON'T POST.


Regarding the valve clearance adjustment, someone did create a write up, it's just on the other site:

http://fzrarchives.com/fzr600/work_benc ... tment.html

The manual is also a great resource for something as in depth as valve clearance adjustments.

tony
100+ Posts
100+ Posts
Posts: 120
Joined: Thu May 27, 2010 12:28 pm
Location: north wales uk

Re: valve clearances and adjustments

Postby tony » Sun Nov 21, 2010 4:36 pm

i agree olie the link is use full info i myself have never done valve clearances as of a few of the guys around here as we used a great guy to do it for us ,he is no longer with us ,but i will certainly be having a go shortly with a bit of help from the community i am sure i will accomplish ,i will also take photos and a writeup of all procedures and if it goes wrong itll be called ( what not to do) with the shim calculator on here it should be easy

User avatar
apsolus
Level 2.5
Level 2.5
Posts: 255
Joined: Sun Sep 19, 2010 7:35 pm
Location: dahlonega GA

Re: valve clearances and adjustments

Postby apsolus » Sun Nov 21, 2010 8:34 pm

damn man get a sence of humor this is a forum its not a matter of life or death! dnt wory about it


Return to “Suggestions & Ideas”

Who is online

Users browsing this forum: No registered users and 1 guest