Frame Plugs

This area is owned and operated by ThatKid (Nate)

Moderators: Site Director, FZR Forum Moderators

thatkid
2000+ Posts
2000+ Posts
Posts: 2026
Joined: Sun May 18, 2008 1:25 am
Location: Chicago, IL
Contact:

Frame Plugs

Postby thatkid » Sat Jun 05, 2010 1:19 am

Well, I have them in the works (as with everything else, I know I know). I'm not sure I'm happy with them yet but here was tonight's first attempt at one. Sorry about the picture quality, it was from my phone.


Installed
Image

Side by side.
Image

The front.
Image

The side view. The grooved area will have an oring in there to keep the plug from vibrating loose.
Image
Image
Do YOU Scopper?

"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."

thatkid

Re: Frame Plugs

Postby thatkid » Sat Jun 05, 2010 1:28 am

I have one missing, looked everywhere to no avail. Put me down for a set.
:udaman

User avatar
zero9243
Level 8.5
Level 8.5
Posts: 896
Joined: Wed May 28, 2008 3:23 pm
Location: Milwaukee, WI
Contact:

Re: Frame Plugs

Postby zero9243 » Sat Jun 05, 2010 4:42 am

mawler wrote:I have one missing, looked everywhere to no avail. Put me down for a set.
:udaman



omg yes super sexy gimme gimme gimme
Upgrades:

    Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
    WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
    V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
    Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
    Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
    Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
    Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
    Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
    Modking Aluminum Radiator Overflow Bottle--------





User avatar
Fizzinatorr
Level 6.5
Level 6.5
Posts: 662
Joined: Fri May 30, 2008 5:05 pm
Location: Middle of NJ

Re: Frame Plugs

Postby Fizzinatorr » Sat Jun 05, 2010 6:00 pm

powdercoat mine, thanks
8 Bikes so far...more coming too...Image

Finished my 2000 GSXR 750 -> Link here http://fzronline.com/forum/viewtopic.php?f=68&t=3617

thatkid
2000+ Posts
2000+ Posts
Posts: 2026
Joined: Sun May 18, 2008 1:25 am
Location: Chicago, IL
Contact:

Re: Frame Plugs

Postby thatkid » Sun Jun 06, 2010 1:53 am

Can do. I just need to get faster at making them. That one took me close to 2 hours to get right. The biggest time user is parting the piece off. I'm going to try and use my bandsaw once I get some lubricant for it and that should save me a ton of time.

Also anyone know if you can recharge a hydraulic ram?
Image
Do YOU Scopper?

"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."

User avatar
kilika2
1000+ Posts
1000+ Posts
Posts: 1268
Joined: Thu Sep 24, 2009 2:50 pm
Location: South East Missouri
Contact:

Re: Frame Plugs

Postby kilika2 » Sun Jun 06, 2010 8:33 am

One art for me too please (futurama reference).

Chris.
ImageImageImage
Before(5/5/09)_____________After(5/5/10)_____________Way After(8/1/10)


1995 FZR600 Sold :-(
2006 R1 Sold :-\
2009 Buell 1125R :-)

User avatar
ragedigital
4000+ Posts
4000+ Posts
Posts: 4151
Joined: Wed May 07, 2008 9:30 am
Location: Northwest St. Louis

Re: Frame Plugs

Postby ragedigital » Mon Jun 07, 2010 8:56 am

Finally something that can be painted to match the frame! Way to go, Nate!
Thanks for joining and participating in the most "active" FZR Community on the internet!

KaspenOne
100+ Posts
100+ Posts
Posts: 130
Joined: Sun Nov 25, 2012 4:48 am
Location: Santa Maria, California
Contact:

Re: Frame Plugs

Postby KaspenOne » Fri Mar 15, 2013 4:26 am

man i need a set aswell lol my rubber ones are all gray and greasy and have pieaces missing out og them
Sal Co-Owner of SisBro Motowerkz, Santa Maria
Pacific Coast Riderz -Vice President- Santa Maria Chapter
1996 Yamaha Fzr 600
UNI Air Filter, FP 1.0, R6 header danmoto exhaust,
Orbit Chain 530 with JT Sprocket Set -1 front/+2 rear
Racetech Front suspension
Bridgestone BT-014 120/70/17 & 150/60/18
http://www.facebook.com/Salvador.Leal.Jr
http://www.youtube.com/user/KaspenOne
http://www.facebook.com/pages/Pacific-Coast-Riderz/163879453630808 & http://www.facebook.com/pcr805

User avatar
Genesis
Level 8.0
Level 8.0
Posts: 828
Joined: Wed Jul 30, 2008 11:47 pm
Location: Washington, USA

Re: Frame Plugs

Postby Genesis » Fri Oct 04, 2013 2:39 pm

Nate, you still making these, what kind if cost are we looking at?

Sent from my C771 using Tapatalk 2
1990 Yamaha FZR600 Genesis, Daily Driver
My FZR6 Rebuild

1985 GMC 4x4 T-15 X-Cab Sierra
1999 Chevy 4x4 Blazer (wifes car)

"If a man can build it, I can take it apart and sometimes even put it back together and fix it" --Unknown

"'I wish none of this had happened.' 'So do all who live to see such times. But that is not for them to decide. All we have to decide is what to do with the time that is given to us.....'" J.R.R. Tolkien


Return to “Green Machine Customs [Custom Fabrication / Machining / Powdercoating]”

Who is online

Users browsing this forum: No registered users and 2 guests