Supersprox for the FZR. I've done it.

This area is owned and operated by ThatKid (Nate)

Moderators: Site Director, FZR Forum Moderators

thatkid
2000+ Posts
2000+ Posts
Posts: 2026
Joined: Sun May 18, 2008 1:25 am
Location: Chicago, IL
Contact:

Supersprox for the FZR. I've done it.

Postby thatkid » Mon Dec 05, 2011 7:07 pm

Ok folks, I've talked with Supersprox and to get a standard price on their high end sprockets I have to order a min of 12. They will cut them in their European factory and ship them over to the US with their standard order. All 12 do have to be the same so I want to go with 50T 520 chain setups. This paired with a 15T front sprocket will give the best performance AND longevity. A properly taken care of Supersprox sprocket lasts about 18k miles. They will also do a lifetime warranty on the rear sprocket if it's purchased with a chain and front sprocket at the same time. Everyone needs chains and sprockets right? Might as well get yours early if you don't need one just yet. It will be about 3 months before I get them in my hands anyway between production and shipping. Should be able to get them to you guys just in time to get them installed before riding season.

Just the rear sprocket - $75 While it's only a $5 savings off retail you have to look at it as a custom sprocket which would normally be $110.
Chain and sprocket set - top of the line RK chain -(RK 520GXW) - $210 shipped to your door in the lower 48. For the RK GB520GXW (gold links) add $15.

Only $210 (includes shipping)

Full kit also come with a t-shirt! Retail of this kit would be $255 I really hope you guys will take advantage of this offer! It was a long time in the making.


01) thatkid (of course I'm in on this!)
02) Zero - Kit
03) Munzo - Kit
04) 950ash - Kit
05) Nunya_binnez - Kit
06)
07)
08)
09)
10)
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)
Image
Do YOU Scopper?

"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."

User avatar
blensen
Level 2.5
Level 2.5
Posts: 254
Joined: Tue Apr 13, 2010 8:08 am
Location: Minneapolis, MN, US

Re: Supersprox for the FZR. I've done it.

Postby blensen » Mon Dec 05, 2011 7:20 pm

Ah if only you could mix and match. I'd be all over this if I wasn't using cad's old vfr swingarm.
1994 FZR600: Hardly anything left stock
Image
02 R6 Front End
Ducati M900 Seat/Taillight
Honda VFR750 Swingarm/Wheel
No Spacer 660
YZF600 Tank
Renthal Dirt Bars
Too much else...

thatkid
2000+ Posts
2000+ Posts
Posts: 2026
Joined: Sun May 18, 2008 1:25 am
Location: Chicago, IL
Contact:

Re: Supersprox for the FZR. I've done it.

Postby thatkid » Mon Dec 05, 2011 7:24 pm

I'm pretty sure they have a sprocket in their line for the VFR so I could offer the same deal if they do, it just won't count towards the FZR sprockets I need in order to get the run produced. Let me check on it.

---Update

They do offer one but it's a bit more. As is the chain because of the extra links. PM'd
Image
Do YOU Scopper?

"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."

User avatar
zero9243
Level 8.5
Level 8.5
Posts: 896
Joined: Wed May 28, 2008 3:23 pm
Location: Milwaukee, WI
Contact:

Re: Supersprox for the FZR. I've done it.

Postby zero9243 » Mon Dec 05, 2011 11:32 pm

Duh. One plz.
Upgrades:

    Barnett Clutch------------------------------------------R6 Blue Dots, Front Master Brake Cylinder+Reservoir
    WP Adjustable Rear Shock----------------------------Vortex 520 Conversion with RK GB520GXW Chain
    V&H Header (4-1)--------------------------------------Swingarm Spool Mounts
    Cobra F1r Exhaust Can--------------------------------R6 Voltage Regulator
    Flo-Commander with Remote-------------------------Custom Airtech Passenger Seat
    Stage 7 Jet kit with Diffuser Caps--------------------Factory Pro Nickel Emulsion Tubes
    Wiseco 630 Kit------------------------------------------Custom Frame Slider Mounts
    Modking Hydraulic Clutch Kit--------------------------Hella Projection Headlight with Xentec HID Kit (H9 Bulb)
    Modking Aluminum Radiator Overflow Bottle--------





User avatar
ragedigital
4000+ Posts
4000+ Posts
Posts: 4151
Joined: Wed May 07, 2008 9:30 am
Location: Northwest St. Louis

Re: Supersprox for the FZR. I've done it.

Postby ragedigital » Tue Dec 06, 2011 9:39 pm

Listen up!

Yes, you can buy the Vortex kit, for around $149, like a lot of folks have in the past - including me, but here's the issue - the Vortex rear is aluminum. The Supersprox hybrid rear sprocket lasts 3x longer, so you're saving BIG time over the long haul. A replacement Vortex rear sprocket is like $70, so add it up!
Thanks for joining and participating in the most "active" FZR Community on the internet!

thatkid
2000+ Posts
2000+ Posts
Posts: 2026
Joined: Sun May 18, 2008 1:25 am
Location: Chicago, IL
Contact:

Re: Supersprox for the FZR. I've done it.

Postby thatkid » Thu Dec 08, 2011 12:42 pm

4 down 8 to go! Come on, every needs a a chain and sprockets.
Image
Do YOU Scopper?

"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."

thatkid
2000+ Posts
2000+ Posts
Posts: 2026
Joined: Sun May 18, 2008 1:25 am
Location: Chicago, IL
Contact:

Re: Supersprox for the FZR. I've done it.

Postby thatkid » Tue Dec 13, 2011 3:04 pm

Bumping for xmas gifts!
Image
Do YOU Scopper?

"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."

User avatar
delvryboy
Level 5.0
Level 5.0
Posts: 543
Joined: Sun Jul 19, 2009 7:25 pm
Location: Chicago
Contact:

Re: Supersprox for the FZR. I've done it.

Postby delvryboy » Wed Dec 14, 2011 10:27 pm

Damn, I should of held out!
'92 FZR600
Race Tech Springs & Gold Valve Emulators * '06 R6 MC & Calipers * '06 R6 Rear Shock
130 Dynojet Mains/Pods/Flo-Comander * Full Yoshi Exhaust w/ Custom Can
'06 R6 VR * Full OEM Clutch * 14/49 520 Gearing
Seca II Triple w/ Modded Sport Tour Bars * Aztec8 Dual 4" w/ 4100K Halagon lamps * LED Tail/Turn Signals * Vapor Gauges
Lots of Powder
Image

thatkid
2000+ Posts
2000+ Posts
Posts: 2026
Joined: Sun May 18, 2008 1:25 am
Location: Chicago, IL
Contact:

Re: Supersprox for the FZR. I've done it.

Postby thatkid » Wed Dec 14, 2011 10:55 pm

delvryboy wrote:Damn, I should of held out!



Psh, with how much you ride you'll be needing one by fall anyway!
Image
Do YOU Scopper?

"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."

thatkid
2000+ Posts
2000+ Posts
Posts: 2026
Joined: Sun May 18, 2008 1:25 am
Location: Chicago, IL
Contact:

Re: Supersprox for the FZR. I've done it.

Postby thatkid » Wed Dec 21, 2011 1:41 pm

Bumping.
Image
Do YOU Scopper?

"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."

User avatar
reelrazor
Wrench
Wrench
Posts: 1658
Joined: Sun Oct 05, 2008 8:19 am

Re: Supersprox for the FZR. I've done it.

Postby reelrazor » Wed Dec 21, 2011 4:48 pm

Is gold the only color option on the chain?
http://www.michiganmobileservice.com/


Image

“A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools.”-Douglas Adams

http://www.youtube.com/user/reelrazor

thatkid
2000+ Posts
2000+ Posts
Posts: 2026
Joined: Sun May 18, 2008 1:25 am
Location: Chicago, IL
Contact:

Re: Supersprox for the FZR. I've done it.

Postby thatkid » Wed Dec 21, 2011 6:25 pm

reelrazor wrote:Is gold the only color option on the chain?


I believe they do red, gold, blue and green. Not sure if it's only in the xso chain or if they do it in the gxw as well. I'll check.
Image
Do YOU Scopper?

"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."

thatkid
2000+ Posts
2000+ Posts
Posts: 2026
Joined: Sun May 18, 2008 1:25 am
Location: Chicago, IL
Contact:

Re: Supersprox for the FZR. I've done it.

Postby thatkid » Mon Jan 02, 2012 4:30 pm

Bumping for the new year. Come on guys!
Image
Do YOU Scopper?

"When some people cry, it's not because they’re weak. It’s because they’ve been strong for far too long."

User avatar
Nunya_Binnez
50+ Posts
50+ Posts
Posts: 67
Joined: Wed Nov 16, 2011 11:54 am
Location: Lawrenceburg, KY, USA

Re: Supersprox for the FZR. I've done it.

Postby Nunya_Binnez » Sat Feb 04, 2012 7:55 pm

I'm down for one kit and one sprocket.

Halfway there! :headbang:

NDB
1993 FZR600 (Currently doing a frame-off buildup)
Nunya's '93 Resto-mod Build [TMI?]

"When life gives you lemons...you probably just FOUND lemons." - Bo Burnham

User avatar
haunter
2000+ Posts
2000+ Posts
Posts: 2266
Joined: Fri May 09, 2008 9:17 am
Location: Urbana, Il USA
Contact:

Re: Supersprox for the FZR. I've done it.

Postby haunter » Thu Feb 09, 2012 9:15 am

too bad I am running a brand new different front sprocket and the chain/rear are like new


Return to “Green Machine Customs [Custom Fabrication / Machining / Powdercoating]”

Who is online

Users browsing this forum: No registered users and 1 guest