!!!!!!!!GHETTO'S BIKE BUILD!!!!!!!! new pics up

For the bad boyz, here a little arena for you to get fightin'!

Moderators: Site Director, FZR Forum Moderators

User avatar
ghettomedic505
100+ Posts
100+ Posts
Posts: 145
Joined: Thu Oct 16, 2008 4:43 pm
Location: new mexico

!!!!!!!!GHETTO'S BIKE BUILD!!!!!!!! new pics up

Postby ghettomedic505 » Mon Mar 30, 2009 12:21 am

so here is a proper introduction my name is kevin. I have a fzr 600 that i picked up last september for 100 bucks. it hadnt run in years the guy said. so with some tlc and ebay parts and the help of the archives i got it running . had it running for a month and then one night when on the highway i hit some gravel on a turn and down i went. so with that i decided to go with a naked/fighter look.
my plans are :shocker
1.r6 tail and undertail-----changed to r1 tail
2.r6 front bakes and vr (maybe)
3.vapor guage
4.new rubber front and back-------r6 swinger
5.total rebuild of carbs and engine overhaul
6.new paint of course
so it began today with me stripping the bike
illl get some pics when i figure out how to upload from my computer??? :duh: :duh: banghead banghead :swear WAIT I THINK I DID IT :banana: :banana: :banana: :banana: :banana: :banana: :banana: :banana:

Image
Last edited by ghettomedic505 on Mon Aug 10, 2009 9:34 pm, edited 5 times in total.
OH I THINK I DROPPED MY MONKEY


Image

User avatar
mossy1200
Level 5.0
Level 5.0
Posts: 535
Joined: Thu Feb 19, 2009 11:27 pm
Location: Wellington New Zealand

Re: Ghetto bike build

Postby mossy1200 » Mon Mar 30, 2009 12:27 am

Hi there.
Go into gallery
Then go into your album on the rt hand side 1/4 way down page and the options will be in the left colum

User avatar
ghettomedic505
100+ Posts
100+ Posts
Posts: 145
Joined: Thu Oct 16, 2008 4:43 pm
Location: new mexico

Re: Ghetto bike build

Postby ghettomedic505 » Mon Mar 30, 2009 1:09 am

mossy1200 wrote:Hi there.
Go into gallery
Then go into your album on the rt hand side 1/4 way down page and the options will be in the left colum

ehh tried it says its too big cant figure out how to resize :duh: ill try again in the morning :swear
OH I THINK I DROPPED MY MONKEY


Image

User avatar
megaloxana
2000+ Posts
2000+ Posts
Posts: 2282
Joined: Thu May 15, 2008 5:05 pm
Location: Hanover, PA 17331
Contact:

Re: Ghetto bike build

Postby megaloxana » Mon Mar 30, 2009 1:11 am

You plan on doing any engine work while its apart? 660 perhaps? maybe 683 even muahahah
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack


ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP :bunny :banjoman

User avatar
ghettomedic505
100+ Posts
100+ Posts
Posts: 145
Joined: Thu Oct 16, 2008 4:43 pm
Location: new mexico

Re: Ghetto bike build

Postby ghettomedic505 » Mon Mar 30, 2009 1:14 am

megaloxana wrote:You plan on doing any engine work while its apart? 660 perhaps? maybe 683 even muahahah

hmmmm would i have to upgrade the tranny to handle the power?????????????
OH I THINK I DROPPED MY MONKEY


Image

User avatar
megaloxana
2000+ Posts
2000+ Posts
Posts: 2282
Joined: Thu May 15, 2008 5:05 pm
Location: Hanover, PA 17331
Contact:

Re: Ghetto bike build

Postby megaloxana » Mon Mar 30, 2009 1:19 am

ghettomedic505 wrote:
megaloxana wrote:You plan on doing any engine work while its apart? 660 perhaps? maybe 683 even muahahah

hmmmm would i have to upgrade the tranny to handle the power?????????????

Nope
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack


ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP :bunny :banjoman

User avatar
cad600
1000+ Posts
1000+ Posts
Posts: 1413
Joined: Fri May 09, 2008 3:41 pm
Location: Atlanta, GA

Re: Ghetto bike build

Postby cad600 » Mon Mar 30, 2009 8:14 am

ghettomedic505 wrote:hmmmm would i have to upgrade the tranny to handle the power?????????????


Double edged question here. There are no upgrades for the tranny. But Mega is correct, you don't have to do anything to it. But if you are going to have the engine apart, look over the gears to make sure they are within spec. The only thing you can do to the tranny is have the gears undercut. Granted you want to be gentil with it if you add more power.
Yes, that is a Single Sided Swingarm FZR600 that I built.

Something is lurking, waiting, wanting to be built......It calls to me from the darkness....

I can finally see the light at the end of the tunnel....Then I realize that it is the train coming to run my ass over....

User avatar
ragedigital
4000+ Posts
4000+ Posts
Posts: 4151
Joined: Wed May 07, 2008 9:30 am
Location: Northwest St. Louis

Re: Ghetto bike build

Postby ragedigital » Mon Mar 30, 2009 8:42 am

The one weakness of FZR - the tranny. Luckily it doesn't cost a ton to replace the shift forks and the shift drum which are some of the main causes of second gear shift problems.
Thanks for joining and participating in the most "active" FZR Community on the internet!

User avatar
haunter
2000+ Posts
2000+ Posts
Posts: 2266
Joined: Fri May 09, 2008 9:17 am
Location: Urbana, Il USA
Contact:

Re: Ghetto bike build

Postby haunter » Mon Mar 30, 2009 8:52 am

welcome!

User avatar
ghettomedic505
100+ Posts
100+ Posts
Posts: 145
Joined: Thu Oct 16, 2008 4:43 pm
Location: new mexico

Re: Ghetto bike build

Postby ghettomedic505 » Mon Apr 06, 2009 12:06 am

UPDATE
well I have the bike totally apart now and I started to strip the paint off the wheels today. also paid for the r6 blue spots and hopefully they be here in a couple of days. ill get some pics when I start sprayin the bike . cant wait for thatkid to be back tomorrow so I can gets my parts WOOT WOOT WOOT WOOT
waiting really sucks banghead
OH I THINK I DROPPED MY MONKEY


Image

User avatar
ghettomedic505
100+ Posts
100+ Posts
Posts: 145
Joined: Thu Oct 16, 2008 4:43 pm
Location: new mexico

Re: Ghetto bike build "update"

Postby ghettomedic505 » Tue Apr 14, 2009 9:48 pm

so the work has screeched to a halt due to some the weather and parts and tool issues. the paint gun i bought on 4/7 still has not arrived so i cant paint the frame and get stuff put back together. but on the bright side got an 07 r1 tail on ebay for 20 bucks :banana: ill post some pics once i get something done
OH I THINK I DROPPED MY MONKEY


Image

User avatar
ghettomedic505
100+ Posts
100+ Posts
Posts: 145
Joined: Thu Oct 16, 2008 4:43 pm
Location: new mexico

Re: Ghetto bike build "update" PICS

Postby ghettomedic505 » Sun Apr 19, 2009 7:35 pm

So got the gun in finally. here are the pics. thats the first coat of primer on the frame and wheels. and the headers is just some hi temp spray paint . ImageImageImageImageImageImage
OH I THINK I DROPPED MY MONKEY


Image

User avatar
sweekster
2000+ Posts
2000+ Posts
Posts: 2773
Joined: Tue May 13, 2008 10:52 am
Location: Perris, CA

Re: Ghetto bike build

Postby sweekster » Sun Apr 19, 2009 8:21 pm

Looking quite spectacular..even for primer.
Duane...
Bike:
1994 Yamaha FZR 1000 EXUP
Factory Pro Stage 1 Jetting | K&N Filter | Corbin Seat | ProTek Keyless Gas Cap | GSXR Mirrors
My Thread
Cage:
2005 Saab 9-7x 5.3i Arc AWD

Image


THE WIKI IS YOUR FRIEND
THE SEARCH IS YOUR SIGNIFICANT OTHER
USE THEM!!

User avatar
shredex
2000+ Posts
2000+ Posts
Posts: 2768
Joined: Sun Sep 07, 2008 10:40 am
Location: Holiday, Florida
Contact:

Re: Ghetto bike build

Postby shredex » Sun Apr 19, 2009 8:30 pm

aw man! you need to get the r6 headers on there! they make your low-end power shoot threw the roof!
Image

User avatar
megaloxana
2000+ Posts
2000+ Posts
Posts: 2282
Joined: Thu May 15, 2008 5:05 pm
Location: Hanover, PA 17331
Contact:

Re: Ghetto bike build

Postby megaloxana » Sun Apr 19, 2009 9:33 pm

You should try to fix your fairing stay bracket before you paint, it looks pretty fooked.
'92 FZR 600
Airtech R1 kit \*/ 520 conversion \*/ 14F-47R gearing
K&N pod filters \*/ Stage 3 jet kit \*/ Factory Pro shift kit \*/ Full V&H SS exhaust
Custom '02 R6 undertail \*/ YZF gas tank \*/ Raised via dogbones \*/ custom flush turnsignals
Full R6 brake set-up \*/ SS lines \*/ Progressive fork springs \*/ ZX2 coilpack


ADD YOURSELF TO THE OFFICIAL FZRONLINE GOOGLE EARTH MAP :bunny :banjoman


Return to “Streetfighter'd / Naked / Chopped”

Who is online

Users browsing this forum: No registered users and 1 guest