R1 / FZR Front End Questions - what works with what?

This is a bad to the bone 1000cc monster.

Moderator: FZR Forum Moderators

User avatar
WSM
Level 2.0
Level 2.0
Posts: 249
Joined: Tue Jun 02, 2009 10:10 am
Location: Austin, Texas

R1 / FZR Front End Questions - what works with what?

Postby WSM » Wed Oct 15, 2014 1:34 pm

I’m swapping a R1 front end on my ’98 FZR600, but figured the R1 Garage would be the best place to get some R1 specifics answered.

I have a set of ’08 R1 forks and a 02-03 R1 lower triple with an FZR stem pressed in.
From what I can tell, those work together. (i’m measuring forks = 54mm, lower triple 55.75mm before bolted tight)

Questions:

Axle:
The axle hole on the forks is 22mm.
Does this change year-to-year, R6 or R1?

Calipers:
Distance between the caliper mounts is 130mm (center of hole)
And I know these are radial calipers, so only 04+ works, right?
Will only 6-pots work, or will 4-pots span that 130mm?
An difference between R6 / R1?

Rotors:
What size rotors?
R6 / R1?

Fender:
What fenders mate with these forks?
R6 / R1?

:tks:
1998 FZR600
All Original, except for a custom saddlebag set up. A machine shop buddy of mine seamlessly fitted two GS bags on the rear end for last summers ride.
30,000+ odo
Image

Return to “YZF-R1”

Who is online

Users browsing this forum: No registered users and 1 guest